Energy Systems
Power Plant & Cogeneration
Micro Steam Turbine (S2E) Cogeneration System
The S2E Micro Steam Turbine captures energy normally lost across pressure-reducing valves (PRVs) and turns it into usable electricity—without disrupting your existing steam network.
Energy Systems
Power Plant & Cogeneration
Micro Steam Turbine (S2E) Cogeneration System
The S2E Micro Steam Turbine captures energy normally lost across pressure-reducing valves (PRVs) and turns it into usable electricity—without disrupting your existing steam network.
Energy Systems
Power Plant & Cogeneration
Micro Steam Turbine (S2E) Cogeneration System
The S2E Micro Steam Turbine captures energy normally lost across pressure-reducing valves (PRVs) and turns it into usable electricity—without disrupting your existing steam network.
Micro Steam Turbine (S2E) Cogeneration System
S2E Micro Steam Turbine
What is it?
The S2E is a compact, plug-in micro steam turbine that replaces or runs parallel to PRVs. Instead of wasting pressure energy as heat, it converts it into electricity—ideal for self-consumption or grid export. Fits existing PRV locations Self-contained steel frame Electrical output: 700–3000 kWe Steam flow: 10–30 t/h Grid-tied or off-grid ready
Direct replacement or supplement to PRVs
Generates electricity from existing steam pressure
Solid steel frame – containerized and transportable
Supports grid export or self-consumption
How It Works
Work Principle
Rather than reducing steam pressure through a valve and losing energy, the S2E lets high-pressure steam pass through a turbine, generating electricity. The resulting low-pressure steam is then sent to your process equipment without disrupting operations.
Micro Steam Turbine (S2E) Cogeneration System
S2E Micro Steam Turbine
What is it?
The S2E is a compact, plug-in micro steam turbine that replaces or runs parallel to PRVs. Instead of wasting pressure energy as heat, it converts it into electricity—ideal for self-consumption or grid export. Fits existing PRV locations Self-contained steel frame Electrical output: 700–3000 kWe Steam flow: 10–30 t/h Grid-tied or off-grid ready
Direct replacement or supplement to PRVs
Generates electricity from existing steam pressure
Solid steel frame – containerized and transportable
Supports grid export or self-consumption
How It Works
Work Principle
Rather than reducing steam pressure through a valve and losing energy, the S2E lets high-pressure steam pass through a turbine, generating electricity. The resulting low-pressure steam is then sent to your process equipment without disrupting operations.
Micro Steam Turbine (S2E) Cogeneration System
S2E Micro Steam Turbine
What is it?
The S2E is a compact, plug-in micro steam turbine that replaces or runs parallel to PRVs. Instead of wasting pressure energy as heat, it converts it into electricity—ideal for self-consumption or grid export. Fits existing PRV locations Self-contained steel frame Electrical output: 700–3000 kWe Steam flow: 10–30 t/h Grid-tied or off-grid ready
Direct replacement or supplement to PRVs
Generates electricity from existing steam pressure
Solid steel frame – containerized and transportable
Supports grid export or self-consumption
How It Works
Work Principle
Rather than reducing steam pressure through a valve and losing energy, the S2E lets high-pressure steam pass through a turbine, generating electricity. The resulting low-pressure steam is then sent to your process equipment without disrupting operations.
Sample Application
From Pressure Reduction to Power Generation
Instead of wasting steam energy through traditional pressure-reducing valves, the S2E micro turbine captures and converts it into usable electricity. This application scenario shows how it integrates directly into existing steam systems—reducing pressure while generating power in parallel.
Converts Wasted Energy
Traditional PRVs bleed off pressure as heat. The S2E captures that pressure drop and converts it into electricity while maintaining the required outlet pressure.
Inline Retrofit, No Process Disruption
Installed in parallel with—or in place of—the PRV between the HP and LP headers, the turbine keeps your steam balance intact.
Flexible Power Use
Electricity can be used on-site or exported to the grid, depending on your plant’s strategy and regulations.
Built for Industry
Rugged steel-frame module with protection class IP55 and tight voltage/frequency regulation for reliable integration with plant systems.
Sample Application
From Pressure Reduction to Power Generation
Instead of wasting steam energy through traditional pressure-reducing valves, the S2E micro turbine captures and converts it into usable electricity. This application scenario shows how it integrates directly into existing steam systems—reducing pressure while generating power in parallel.
Converts Wasted Energy
Traditional PRVs bleed off pressure as heat. The S2E captures that pressure drop and converts it into electricity while maintaining the required outlet pressure.
Inline Retrofit, No Process Disruption
Installed in parallel with—or in place of—the PRV between the HP and LP headers, the turbine keeps your steam balance intact.
Flexible Power Use
Electricity can be used on-site or exported to the grid, depending on your plant’s strategy and regulations.
Built for Industry
Rugged steel-frame module with protection class IP55 and tight voltage/frequency regulation for reliable integration with plant systems.
Sample Application
From Pressure Reduction to Power Generation
Instead of wasting steam energy through traditional pressure-reducing valves, the S2E micro turbine captures and converts it into usable electricity. This application scenario shows how it integrates directly into existing steam systems—reducing pressure while generating power in parallel.
Converts Wasted Energy
Traditional PRVs bleed off pressure as heat. The S2E captures that pressure drop and converts it into electricity while maintaining the required outlet pressure.
Inline Retrofit, No Process Disruption
Installed in parallel with—or in place of—the PRV between the HP and LP headers, the turbine keeps your steam balance intact.
Flexible Power Use
Electricity can be used on-site or exported to the grid, depending on your plant’s strategy and regulations.
Built for Industry
Rugged steel-frame module with protection class IP55 and tight voltage/frequency regulation for reliable integration with plant systems.
Other Cogeneration Systems
Engine-Generator Based Cogeneration System
Use both electricity and heat from the same fuel. Our containerized engine-generator systems recover exhaust and cooling heat — boosting thermal efficiency up to 80%.
Steam Turbine Cogeneration System
Electricity as a byproduct of steam. Steam turbines generate power while supporting heat demands — ideal for large-scale industrial use.
Other Cogeneration Systems
Engine-Generator Based Cogeneration System
Use both electricity and heat from the same fuel. Our containerized engine-generator systems recover exhaust and cooling heat — boosting thermal efficiency up to 80%.
Steam Turbine Cogeneration System
Electricity as a byproduct of steam. Steam turbines generate power while supporting heat demands — ideal for large-scale industrial use.
Other Cogeneration Systems
Engine-Generator Based Cogeneration System
Use both electricity and heat from the same fuel. Our containerized engine-generator systems recover exhaust and cooling heat — boosting thermal efficiency up to 80%.
Steam Turbine Cogeneration System
Electricity as a byproduct of steam. Steam turbines generate power while supporting heat demands — ideal for large-scale industrial use.
Plan Your Plant’s Energy Roadmap
Talk with our engineering team and map the next few years of your energy strategy—what to do first, what to defer, and how to stage upgrades without disrupting production. We align design, build, and lifetime maintenance under one plan so your plant runs cleaner, steadier, and easier to manage. You leave with a clear path, owners, and next steps.
Plan Your Plant’s Energy Roadmap
Talk with our engineering team and map the next few years of your energy strategy—what to do first, what to defer, and how to stage upgrades without disrupting production. We align design, build, and lifetime maintenance under one plan so your plant runs cleaner, steadier, and easier to manage. You leave with a clear path, owners, and next steps.
Plan Your Plant’s Energy Roadmap
Talk with our engineering team and map the next few years of your energy strategy—what to do first, what to defer, and how to stage upgrades without disrupting production. We align design, build, and lifetime maintenance under one plan so your plant runs cleaner, steadier, and easier to manage. You leave with a clear path, owners, and next steps.
Full System
Engineering
Full System Engineering is a trusted Thai engineering company specializing in energy systems, steam boilers, compressed air systems, and industrial infrastructure for factories and power plants.
With over 25 years of experience, we deliver turnkey engineering services that are energy-efficient, cost-effective, and sustainable.
Call Us
+662-497-9280-4
+662-420-6444-5
Visit Factory
66 Moo 2, Krathum Lom Subdistrict, Sam Phran District, Nakhon Pathom 73220
Office Hours
Mon-Fri: 8am-5pm
Sat-Sun: Closed
Email Us
fullsystem1@yahoo.com
fullsystem2@yahoo.com
Copyright © 2025 – All Right Reserved
Full System
Engineering
Full System Engineering is a trusted Thai engineering company specializing in energy systems, steam boilers, compressed air systems, and industrial infrastructure for factories and power plants.
With over 25 years of experience, we deliver turnkey engineering services that are energy-efficient, cost-effective, and sustainable.
Call Us
+662-497-9280-4
+662-420-6444-5
Visit Factory
66 Moo 2, Krathum Lom Subdistrict, Sam Phran District, Nakhon Pathom 73220
Office Hours
Mon-Fri: 8am-5pm
Sat-Sun: Closed
Email Us
fullsystem1@yahoo.com
fullsystem2@yahoo.com
Copyright © 2025 – All Right Reserved
Full System
Engineering
Full System Engineering is a trusted Thai engineering company specializing in energy systems, steam boilers, compressed air systems, and industrial infrastructure for factories and power plants.
With over 25 years of experience, we deliver turnkey engineering services that are energy-efficient, cost-effective, and sustainable.
Call Us
+662-497-9280-4
+662-420-6444-5
Visit Factory
66 Moo 2, Krathum Lom Subdistrict, Sam Phran District, Nakhon Pathom 73220
Office Hours
Mon-Fri: 8am-5pm
Sat-Sun: Closed
Email Us
fullsystem1@yahoo.com
fullsystem2@yahoo.com
Copyright © 2025 – All Right Reserved